Fix Panasonic TV Not Turning ON Red Light Blinking-Quick Guide

Are you looking to resolve the issue, ‘The Panasonic TV not turning ON but the red light is blinking?’ You are on the right platform, we will solve your problem just in a few minutes.

Panasonic TVs are available in various models. But, all of them have a power light on the front. When you power off and on your TV, this red light blinks.

Sometimes, the red light blinks continuously but the TV cannot turn on. This indicates that your TV has some software or hardware defect in it. You can fix it by trying different troubleshooting methods.

In this article, we will tell you all the tested solutions that will quickly fix your Panasonic TV that is not turning on despite the red light blinking. So, let us start the process.

1. Use TV Buttons Instead of the Remote

The best check is to turn on your Panasonic by pressing the power button on the TV set. If this also cannot turn on the TV, try the below-mentioned tips.

The remote of your Panasonic TV or the remote sensor on it may have stopped working. Therefore, the red light on your TV is blinking but it is not turning on.

2. Reset the Remote Control

Resetting your remote can also resolve the problem. Open the back cover of your remote and take out the batteries. Insert the batteries again after a few seconds or replace them with the new batteries.

If you have another compatible remote at hand, use it to turn on your TV. If it works then the IR remote sensor on your TV is fine.

Panasonic TV Not Turning ON Red Light Blinking

3. Power Cycle Your Panasonic TV

The first thing you should try is to power cycle your TV. You can power cycle your Panasonic TV by the following method;

  1. Turn off your TV manually or through the remote. Disconnect all the cables and connected devices from your TV.
  2. Unplug the power cord from the wall power outlet.
  3. Now, press and hold the power button of your Panasonic TV for 30 seconds.
  4. When the red light flashes, release the button.
  5. After 10 minutes, plug in the power cable and turn on the power supply. Press the power button on the TV set to turn it on.

4. Reset Your Panasonic TV

You can try the power cycle more than once. However, if it does not work, another reset method is as follows;

  1. Turn off your TV and disconnect from the power supply.
  2. Wait for 60 seconds. Now, press and hold the ‘down program arrow button’ on your TV set.
  3. Meanwhile, hold the power button on the remote till your Panasonic TV turns on or the power light flashes green.

Hopefully, your TV turns on now. If this solution does not work, move on to the next.

5. Ensure Ventilation

Overheating can also cause your TV not to turn on. If you keep your TV powered on for several hours, it gets overheated. In case, it cannot dissipate heat, your TV stops working.

To keep your TV cool, ensure proper airflow. Make sure that your TV is getting enough air and is not enclosed in a cabinet or room with no air.

Its vents which are usually located at the back should not be covered by anything. Otherwise, the airflow will block and the internal components of your TV will start melting. Moreover, there should not be any heat source near your TV.

6. Check All the Connections and Devices

One reason your Panasonic TV is not turning on is loose connections or faulty cables. Check the power cord for short circuits or bends.

If your TV is not getting enough power supply, it will not turn on although the red light blinks. So, ensure that your TV is connected to a functional power outlet and receives the required voltage.

In addition, the HDMI cable may be damaged. You may have connected your TV to some external video or audio device such as a cable box, TV Stick, or gaming console.

If this device is not sending signals, your TV will not turn on. It is recommended to disconnect all the cables and devices from your TV.

After a few minutes, connect the cables again. Make sure that they are plugged in firmly and are not loose. If this does not work, reset the connected device.

7. Inspect the HDMI Cable

Another trick is to use a different HDMI cable with your TV. Because a faulty cable cannot deliver signals hence your TV does not turn on.

Check the internet signal strength if your TV is connected to Wifi. If it works, you need to replace the older HDMI cable.

8. Do Some Cleaning

Generally, people do not pay heed to the health of their TV. Over time, the openings on your TV accumulate dust or debris.

If you do not clean the ports, the dust enters the internal circuit of your TV. Therefore, it affects the power flow to different parts of your TV.

The connection cables cannot be plugged in properly if the ports are dirty. So, cleaning all the openings on your TV can resolve the problem.

Use a small toothbrush and gently move it in the ports. You can also use a microfiber cloth to clean the parts. Air can is also a good option to blow out the dust completely.

If possible, remove the back cover of your TV and clean the internal parts also. But, be gentle and do not use sharp objects to avoid any damage. After a thorough cleaning, try turning on your TV again.

9. Contact Panasonic Support Team

Try all the above-mentioned solutions to fix your Panasonic TV. These simple tricks can resolve the issue in most cases.

However, if nothing works then you should contact the support team of Panasonic. Explain to them your issue and they will come to check the hardware defects in your TV.

If your TV is under warranty, you will get a free repair. Nevertheless, if your TV is several years older, you need to pay expenses.

Maybe its fuses are blown out or the circuit board is faulty. In this case, you can consult a local technician. He will sort out the problem and will repair your TV.

10. Replace Your Old TV

Replacing the minor components (capacitors, cables, or fuses) of your Panasonic TV does not cost you high.

However, if some major component (backlight or circuit board) has expired, its replacement can cost you high.

So, we recommend you find out the real defect first and then get information about the estimated cost for repair. If your TV is too old and its repair is expensive then you should buy a new TV.

Also Read: Philips TV Not Turning OFF

Final Words

We hope that our guide has fixed your Panasonic TV that is not turning ON but the red light is blinking. Stay connected with us to find the best solutions to your technical problems.

Hi, I'm Noor Alam, Founder of HowToFinders.com. I'm naturally inclined towards modern technical gadgets and Love to solve different problems regarding these gadgets. I will share information with you on how to fix different old devices and how to find the best products. You'll find great help from my research and experience.
Hi, I'm Noor Alam, Founder of HowToFinders.com. I'm naturally inclined towards modern technical gadgets and Love to solve different problems regarding these gadgets. I will share information with you on how to fix different old devices and how to find the best products. You'll find great help from my research and experience.