In recent years, coffee makers have become an adored appliance for coffee lovers. Out of many brands, Ninja is very popular. But, sometimes it stops brewing after 3 continuous beeps.
Certainly, there are some underlying reasons for this issue. It can be a warning sign indicating some error in the machine.
Whatever the cause is, we can fix it with a few easy hacks. This guide will explore the problem and will suggest to you the potential solutions to fix your coffee maker.
What 3 Beeps Indicate on Your Ninja?
A number of factors can cause the beeping issue. However, you should know what this beeping pattern indicates and what might be triggering it. Some common reasons are as follows;
- Wrong position of the drip stop
- Closing the drip stop mid-brewing
- The machine is clogged and needs cleaning
- Malfunctioning sensors
- Obstruction in the water flow
- Faulty power supply, electrical fluctuations, or power surge
- Software glitches or hardware defects
How to Fix Your Beeping Ninja Coffee Maker?
There are a few possible causes that can cause beeping. In the next section, we will understand each cause and will try to resolve it.
We have devised some very effective remedies to troubleshoot your coffee maker.
1. Check the Water Reservoir
Too little water in the tank also causes this issue. You should pour enough water that matches your brew size. Turn OFF your Ninja and check the water level in the tank.
Pour more water up to the marked line according to the brew size. Then, turn ON the machine and start the brewing process.
2. Reset Your Ninja
A simple solution to fix software issues is to reset your coffee maker. It will resolve a number of problems. Follow these steps to reset the machine;
- Shut down your Ninja coffee maker completely and unplug it from the power.
- Leave it OFF for 5 minutes. This will dissipate all the residual heat and will refresh the appliance.
- Now, plug the machine into the power outlet and press the “Power” button.
- Finally, check its functioning by starting a brewing cycle.
3. Have You Closed the Drip Stop?
The drip stop is a small lever moving right and left. It is located at the bottom of the brew basket at the point from where the coffee flows.
In fact, it controls the coffee flow from the machine to the pot. When this lever is moved toward the left, the coffee will not dispense.
Moving it to the right will open the flow path. So, it serves to fill your cup to the desired level.
The incorrect position of the drip stop leads to the beeping issue. However, it also has automatic programming functions.
For example, sometimes, you close the drip and stop mid-brew to fill your cup. After 20-30 seconds, the machine will start beeping and the indicator will glow.
It reminds you that the drip stop is closed and you have to open it for resuming the brewing process. Otherwise, the machine will stop brewing after 5-6 minutes.
In this case, 3 beeps are not a cause of concern, just resume brewing and it will be silent. Once the process is complete, you can close the lever.
4. Clean Your Coffee Maker
Another possible reason is that your machine is not clean enough. Generally, the clean indicator tells you the situation. So, you have to start a clean cycle.
Because minerals and impurities of water accumulate and deposit inside the water reservoir, inner connection, or the brew basket.
Thus, water cannot flow freely during the brewing process. Here are the steps to clean your machine thoroughly;
- Use a cleaning solution or vinegar, and add some water to dilute it.
- Now, fill this mixture into the water reservoir.
- Then press the “Full Carafe” and the “Clean” button.
- It will take almost 60 minutes for deep cleaning.
- After that, you have to rinse the reservoir and carafe with running tap water.
5. Fix the Water Reservoir Valve
Besides the drip stop, there is a valve at the bottom of the water tank. It opens up automatically when the machine is brewing.
However, it is vulnerable to damage because of its plastic material. Hence, water cannot flow through the machine if the valve is broken.
Failure to pull the required amount of water will lead to a beeping issue. The solution is to replace the valve or the reservoir tank.
6. Faulty Power Supply
Interruptions in the power supply also lead to the issue of beeping. The power supply outlet may be faulty.
Likewise, fluctuations in the current supply or power surges can be the reasons. You should check the power supply whether it is working well or not.
Moreover, observe the light indicators on your machine to confirm it is receiving enough current.
Connect your Ninja to a different outlet. Try to reset the circuit breaker and check the surge protector.
7. Check the Sensors
Your Ninja coffee maker is installed with many sensors such as temperature, pressure, and water level sensors. They monitor and control the brewing process at different stages.
A malfunctioning sensor can receive and convey the wrong message. For example, it may not provide correct readings and trigger the warning beeps.
Thus, the machine will not work normally. You cannot fix it yourself and need professional help.
8. Contact the Manufacturer
Hardware problems cannot be fixed at home. It is recommended to contact Ninja customer support if your appliance is under warranty.
Usually, Ninja offers a 1-year warranty for coffee machines excluding wear and tear. The company will provide you with free repair services.
If the product has a built-in fault, you may get a replacement unit. However, if the warranty has expired, you can contact a nearby technician for a quick repair.
Frequently Asked Questions
By reading the following frequently asked questions, you can get further information about your Ninja and coffee makers in general.
How to dispose of a coffee maker that cannot work anymore?
There are several ways to dispose of your coffee machine that no longer works. For example, you can give it to the waste company or to a local Goodwill store. Moreover, you can return it to the store from where you purchased it. Most manufacturers have a recycling program, contact your company.
How long does a coffee maker last?
The average lifespan of a coffee maker can go up to 5 years. However, it depends on the brand, quality, and maintenance. Proper handling and care, on the part of the user, can extend its life up to 10 years.
What does a blinking light on a Ninja coffee maker indicate?
The light blinks on pressing the “Start” button. It is caused by two factors; the brew basket is not fully inserted or there is no filter holder in the brew basket. Adjust and check these parts to resolve the problem.
Also Read: Can You Plug A Coffee Maker Into A Power Strip?
Concluding Words
In this article, you have learned the possible reasons for the issue under discussion. We have also explained all the potential solutions to fix your Ninja coffee maker that beeps 3 times and then stops brewing. If you want to troubleshoot your appliance at home, follow all the instructions correctly.
