Fix Vantrue N2 Pro Keeps Turning OFF

Your Vantrue N2 Pro dash cam keeps turning off? You can’t figure out why? In this article, we will provide you with the solution to your problem and show you how to fix Vantrue N2 Pro that keeps turning off. Follow the steps below and enjoy it!

Do let me know by the end of the article if you were finally able to solve the problem. All of these steps are personally tried by me.

What to Do if Your Dash Cam Keeps Turning OFF

Dash cams are convenient to have if you’re on a long road trip and want to protect yourself from an insurance scam.

But these handy little gadgets can be a hassle to deal with if they turn off every now and then. Luckily, there are ways to fix your dash cam and get it back up and running. Here’s what you need to do.

Solution 1. Disconnect the Power Supply

If your Vantrue device keeps turning off, try removing it from your cigarette lighter power supply. This may solve your problem temporarily but is not an ideal solution.

The best way to fix it is to permanently remove power as a possible cause of problems and install a backup battery instead.

 Vantrue N2 Pro Keeps Turning Off

The majority of issues with car dash cams are caused by bad wiring or lightning storms, both of which can be remedied with a backup battery or dual voltage system.

Solution 2. Check the Recording Mode

If you have configured your dash camera to record in Parking Mode but it keeps turning off, then maybe you haven’t turned on Parking Mode or something may be interfering with Parking Mode.

Check that your dash camera is in Parking Mode and there are no vehicles or people in front of your car causing interference.

If both of those things are true, reboot your dash camera by unplugging it from power and plugging it back in. This should solve the problem temporarily.

Solution 3. Use the Blackvue App

If you use a Blackvue dashcam, update your firmware and install the Blackvue app. It has options to disable parking mode from your phone.

You can still use Motion Detection parking mode by going into your dashcam settings instead of using an app, but if you don’t want to log in every time then use an app.

The downside is that it will still go into parking mode automatically when recording video if power drops below 12V.

However, at least then you will be able to see what happened while you were away by checking your phone’s video feed!

Solution 4. Update Firmware

If your dash cam has a firmware update function, you may want to try updating it. This will solve any minor software problems that might be causing it to shut off while recording.

If an update is available, download and install it immediately. If one isn’t available, try downloading a different dash cam app (if yours didn’t come with one). Both of these solutions can solve common issues with a camera shutting off when it shouldn’t.

Solution 5. Reset Cam Settings

One method that has been known to help users get their dash camera to turn back ON is resetting its cam settings.

  • If you’re going to attempt this solution, make sure you have a blank microSD card on hand, and don’t forget to safely remove any other footage from your memory card before doing so.
  • To reset cam settings, insert a blank microSD card into your dashboard camera and turn it ON in parking mode.
  • Once parked, press down on both sides of your dashboard camera at once (this should take around ten seconds) and then wait five more seconds before letting go.
  • The purpose of using parking mode is that it allows you to continuously record without draining power, so even if your device turns off or freezes while parked, your previous footage will still be saved.

Solution 6. Format SD card

There are a couple of reasons why your dash cam is turning off. The most likely one is full storage. If that’s not it, then you probably have to format your SD card for better performance.

That’s because it can be corrupted or clogged with bad blocks from too many files that were deleted. If you’re trying to fix your dashboard camera, you need to perform this step. It can be fruitful for you.

Also go through: Car Radio Turns On But No Sound Issue Solved


The issue is happening after you update your software. It should be fixed when you connect it to a computer with a different operating system or if you use it on another device such as an iPhone or tablet.

You’ll need to send your Vantrue N2 Pro back to get repaired, but they will fix it free of charge and expedite shipping so that you get it back as soon as possible. The company would do it better on their behalf because they are experts in their field.

I'm a Professional Content Writer on and willing to write Articles on Technology-based Items. Writing basically is not my job but I consider it as my hobby and passion. I have been working as a Content writer for quite some time.
I'm a Professional Content Writer on and willing to write Articles on Technology-based Items. Writing basically is not my job but I consider it as my hobby and passion. I have been working as a Content writer for quite some time.

Leave a Comment