If you have an electric bike that has been gathering dust in your garage, you may want to get it out and start using it again as the summer approaches.
However, if you notice that the display screen on your bike isn’t working.
It may make it hard to know how much battery power you have left or how fast you are going when you’re riding around town.
I was worried about my case because I just got stuck in the middle of my venture.
My display went off and I was in deep distress because I was unable to point out the potential failure that has occurred.
This article will give you some suggestions about how to fix an electric bike display not working so that you can start cycling again this summer.
Make sure you have the proper charger
It’s important to make sure you have a compatible charger for your e-bike battery.
In many cases, you are getting an incorrect or poorly made charger can cause damage to your bike battery and could result in fire.
Also, don’t leave your e-bike unattended while charging—in some cases, it can catch on fire if left charging too long!
While it is important to only charge your e-bike with a compatible battery and an appropriate charger, there are ways that you can lower the risk of battery issues with regular maintenance.
We recommend storing your bike indoors (preferably in a cool dry place) and cleaning off any corrosion.
It might be present on exposed metal surfaces such as connectors or clamps on a regular basis.
Charge longer
According to some experts, one of the best ways to keep your e-bike battery lasting longer is by charging it longer.
This can help you get more miles from a single charge. For example, if you use an e-bike for ten miles, charge it for 12 hours before using it again.
According to industry research, charging for about eight hours can prolong your battery’s lifespan by around 15 percent. Ideally, you want to avoid charging your electric bike overnight.
Instead, try and unplug your e-bike when it hits 80 percent capacity so that there’s still juice left in its tank.
If you’re going on a long ride with multiple stops along the way, take note of how far you have traveled on each trip and recharge at 80 percent.
Check to see if your controller and display connections are damaged
It’s possible that your controller and display wires are disconnected or damaged. Check each connection to make sure they look undamaged and are inserted firmly into their respective ports.
If you find that one of these wires is damaged, you can solder in a new one or replace it with a compatible wire (available at any electronics store).
Once everything has been inspected, turn on your electric bike display to see if it works properly.
If it still doesn’t work after inspecting all of your connections, then you might need to replace your controller or switch units completely.
In either case, contact an electric bike specialist for assistance.
Check with the manufacturer for warranty service information
While some parts of your electric bike can be repaired or replaced on your own. There are many that require a specialist touch.
When in doubt, look for contact information from your manufacturer to determine if warranty service is available.
Many manufacturers offer extended warranties on certain parts and components; it’s always worth checking with them first.
If they’re not willing to help out with an issue, you can ask where you might be able to find someone who will do a good job instead.
Sometimes it’s better to just replace something on your own than go through multiple reps. Especially if you have no confidence that you’ll get things resolved correctly or promptly.
Check if the battery has a blown fuse
If your battery has a blown fuse, there’s an easy fix. Fixing a blown fuse is as simple as locating it and replacing it with another one.
Each electric bike will have its own set of fuses. These are generally easy to find because they’re all wired together inside of a small container.
Most electric bikes use two different sizes of fuses, so don’t panic if you can’t find yours—just use another. A short in your wiring can also cause it.
Wires can become worn over time, and develop cracks or holes through which current can escape into other wires or out of the system entirely.
Also read: How To Reset A Bike Battery
Also watch video to fix this problem
Conclusion
When you ride your electric bike, it is essential to make sure that everything is working well. You do not want to be stuck on a hill with a dead battery. If your display does not work, don’t worry.
It is easy to fix, and you can have it up and running in no time at all. This guide will show you how to fix an electric bike display not working.
You can get back out there on your bike and start enjoying it again!
There are tons of benefits to using an electric bike instead of a regular one.
You get more exercise while also getting places quicker – which saves gas money too! With everything working properly, however, your experience with your e-bike will be even better than ever before.
