Most of us own cars and are familiar with Radio because it entertains us. Driving without songs can be exhausting and one feels lethargic in the absence of music while driving. A fault in Radio can be frustrating. We will discuss what steps to ensure if the Radio has stopped working even after turning it on.
Radio can stop working due to various reasons including hardware as well as software problems. The main concern for anyone is to find out the root cause after the radio has stopped working.
We will discuss some reasons due to which this issue might have occurred.
A problem in the settings
This problem might have occurred due to improper settings. Settings play a major role in everything because settings ensure how the device will work.
Try to change the system setting from the audiotape and try again. Reset the settings one time. Hopefully, it will work now and the problem will be solved.
If it does not, then try other steps.
Radio on the wrong source
There might be a possibility that the radio might be set on the wrong source. i.e. AUX, BT. Figure out and change it to the Radio if that is the problem.
After changing it to the Radio, it should work properly from now on.
This is a very common problem that causes the radio to malfunction. The fuse is apparently responsible for various functions related to the electronic systems in the car.
A fuse might be blown out due to which radio has stopped working. A fuse is very easy to find out from the market and it is not very expensive and also can be changed with little attention.
How to find out if the fuse is blown out?
Check the car manual and look at all the fuses. See that if any of the fuses are blown out. To see that, simply look closely at the fuses and notice the difference between them.
The wire connection of a blown fuse will be cut off while the connection of a fuse that is completely fine will have a complete wire going through it. After finding the affected fuse, simply change the fuse and try again.
Tip: You should keep a fuse box with you all the time inside the car. It can be beneficial because a fuse can blow out anytime.
The wiring might become short due to the connection to any metal. Two wires should also not be in direct contact with each other due to which there is a connection problem.
Try looking for any possible connection of any wire connected to the radio to the conductor and look for an electrician who can do the job for you. If not then simply insulate the wires or change them.
The Antenna connected to the radio might be at fault due to which radio has stopped working. The antenna is the most important aspect related to any radio because it catches signals.
After catching signals it converts them to audio signals which are listened to by our ears. A faulty antenna can cause signals to get distorted. Try to change the antenna and look if the problem has been sorted out.
Other technical, as well as software problems, can cause this problem. If the problem still continues even after trying the above-mentioned solutions, then contact an expert or try to change the radio.
Also, contact the support of the car manufacturer, they can also help in sorting out the problem.
In short, I hope the above steps have helped you in solving your query and the great experience of sound has been restored in your car. I always try to make things simple and easy in my articles. We discussed what to do if Car Radio Turns On But No Sound and reached possible solutions.
Hope you might have gotten some sort of help out of this writing. Do let me know if you really did.