Power lift chair is an electrical chair which helps you to change your position in two ways. Stand and lay position. It has an automatic system that you can adjust by yourself. It is beneficial for elders. But When using your power lift chair, occasionally it will get stuck in the up position and you may have to use force to lower the chair back down again to its normal position.
While this type of problem can be inconvenient at best, it can also be dangerous if you have any physical limitations that will prevent you from lowering the chair yourself should it get stuck in the up position.
Fortunately, there are several easy things you can do to prevent this problem from occurring or getting worse once it has started. These steps are personally tried by me and can help you in every way. Read the whole article for the best results.
Table of Contents
ToggleIdentify the problem
If your power lift chair is stuck in a raised position, there are several possible solutions. The most important thing to do is to remain calm and remember that if you’re not hurt, it’s probably not a major emergency.
Make sure that you don’t put any extra strain on your back by trying to move or force anything. If there is no visible damage and everything looks normal, it may be a simple matter of re-connecting some wires or making sure all of your screws are tight.
Determine if you can fix it yourself
You can easily resolve a stuck power lift chair by taking off a couple of bolts. If you’re not comfortable doing it yourself, most lift chairs come with user manuals with repair instructions.
However, if you’re unsure about your ability to complete repairs on your own and you don’t have time to wait for an appointment at a local retailer or service center, contact an authorized dealer or manufacturer directly for assistance.
They will be able to help even if they aren’t able to fix your chair in person (depending on their policy).
Use your repair kit (if applicable)
A quick search of our store will turn up a large variety of lift chair repair kits; these parts-on-demand solutions can be invaluable for situations like these.
Should your chair break down, ordering one of these kits will get you up and running again in no time at all? A handy resource to keep around, should any of your older equipment give you trouble.
Test the control panel functions
Before moving a power lift chair, you should first ensure that there isn’t any obstruction blocking it from descending. To do so, test each of its control panel functions. Especially those that are used to lowering and raising a seat.
Test buttons for all four directions, left and right, up and down—if your power lift chair isn’t lowering or raising when you press one of these buttons on your control panel, then there is likely an obstruction or something is stuck underneath it.
Carefully move anything out of the way to see if your chair responds as expected; if not, contact customer service of your product.
Reset the lift chair
Recliners have motors and wires, so sometimes they can get a little stuck. If your lift chair is stuck in an upward position, you may need to reset it.
You can do that by finding your manual release button (it’s usually on or under your armrest). Once you’ve found it, use a long screwdriver to gently push it until you hear a click. The chair should now move down.
If that doesn’t work, turn off your lift chair and unplug it from its power source before pressing and holding down both of its buttons at once for five seconds.
After that wait five more seconds and press them again—only with one hand now. Until the chair moves downward or stops moving altogether, keep doing this step.
If none of this works, contact your dealer
Chances are, it’s still under warranty. If you’re having issues with an item that’s out of warranty, check your owner’s manual. These days most manufacturers will help you troubleshoot a problem through online resources or videos.
Check those out and see if you can figure it out yourself (or at least find someone who has had a similar issue). If all else fails, call customer service or stop by your local dealer for advice. You may also want to try a repair shop to get additional help from professionals if necessary.
Related: Â Mobility Scooter Battery Not Charging Solved
Conclusion
Your problem of Power Lift Chair Stuck In Up Position might be solved after reading the article. A power lift chair is an excellent option for anyone who wants to improve their mobility while enjoying style and comfort.
These chairs allow you to safely lift up. It also helps to lower yourself in any direction so that you can move more easily throughout your home. However, lifting chairs may pose a safety hazard if they are not used properly.
For example, if you try to raise yourself higher than recommended or move too quickly, there is a chance of injury. That’s why it’s important to read manufacturer instructions carefully before operating your chair.
Also, keep in mind that improper use could lead to damage of your equipment over time. It should be repaired by a professional as soon as possible.