How To Fix O Cedar Spin Mop Not Spinning

O Cedar manufactures many different kinds of mops. One of the most popular models is the O Cedar Spin Mop. However, due to poor construction or possibly damage, some models of this mop may cease to spin and only move in an up and down motion instead.

This problem can be caused by a variety of issues, but luckily there are also ways to fix it as well! Learn how you can resolve this issue in this article about how to fix an O Cedar Spin Mop that isn’t spinning!

In my case, when I got a new mop, the reason for the problem could not be identified in the beginning. But by searching through the internet, I got some fixes which also helped me. Some of the reasons and the solutions are as follows.

Remove excess water from your mop

If your mop is soaking wet, you need to wring it out first. A mop that is left soaking wet will produce less and drier suds with each pass, making it more difficult to remove stains.

To remove excess water, pull your bucket up close to your sink and stick a small section of your mop into a container of water. Wring that section of mop tightly until all of the excess water has left your sponge and all you’re squeezing out is soap bubbles.

Do not squeeze too hard or else you may end up damaging your sponge or dislodging its embedded agitator bars.

O Cedar Spin Mop Not Spinning

Locate broken components

Most problems with mops stem from issues with a defective or broken part. Because mops are often made of plastic, replacing a broken part is as simple as driving to your local hardware store and buying one.

When purchasing replacement parts, it’s important to remember that not all manufacturers use standard names for their parts, so you may need to ask an employee at your local hardware store which parts are compatible with your specific model of the mop.

Once you have purchased replacement parts, disassemble your mop head and replace defective components. After replacing necessary components, reassemble your mop head and test out its functionality before reinstalling it onto your handle.

If necessary, readjust screws on your handle in order to keep your head aligned properly while spinning freely.

Understand how you can fix it

The O-Cedar Microfiber Spin Mop isn’t just a scrubbing mop. It’s also a solution to clean your home more easily. However, sometimes things go wrong and it doesn’t spin like it used to.

Don’t worry! There are easy steps you can take to get your O-Cedar Microfiber Spin Mop back in order so you can start scrubbing away grime and dirt from your home once again.

Before attempting any fixes, read through all of these tips on how to fix an O-Cedar spin mop that won’t spin correctly.

Get help if needed

If you can’t fix it yourself, don’t be afraid to ask someone else for help. Sometimes a Google search is all you need, but if not then there are numerous forums and DIY videos that will get you out of a jam.

Need professional advice? If you’re within warranty range, check with O-Cedar customer service. Finally, don’t feel embarrassed to call in a favor from a friend or family member. Sometimes it’s nice to have another set of hands and eyes on your project!

Also read: Remove Cedar Spin Mop Head Fixed

Also watch the video to fix your Mop

Conclusion

In conclusion, these mops are ideal for someone who needs to regularly clean a large area and doesn’t have a lot of time. If you are looking for something that will allow you to simply push forward and watch it spin on its own, then we recommend going with either of these.

Although they aren’t electric, they make up for that in low-maintenance convenience and effectiveness. The two mops discussed here will give you a good bang for your buck.

But if you need something more powerful or you don’t want to risk damaging your flooring by using one of these, we would recommend that you take a look at our other articles.

I'm a Professional Content Writer on howtofinders.com and willing to write Articles on Technology-based Items. Writing basically is not my job but I consider it as my hobby and passion. I have been working as a Content writer for quite some time.
I'm a Professional Content Writer on howtofinders.com and willing to write Articles on Technology-based Items. Writing basically is not my job but I consider it as my hobby and passion. I have been working as a Content writer for quite some time.