Have you ever wondered if your standing desk can be fixed by yourself or whether you will have to bring it back to the store in order to get it repaired?
Well, now you do not have to worry about that as I have created this article in order to help you fix your manual standing desk that keeps getting stuck in the up position.
The following content will walk you through all the steps necessary. You can fix your desk on your own and enjoy working while standing again!
Removing the top cover
If your manual standing desk has a cover that hides its mechanisms, you should remove it. This will give you better access to all of its parts.
Before you do anything else, unplug your desk or turn off any power strips. Your manual standing desk is probably full of electricity. It may be getting shocked could be bad for both your health and your finished project.
If there are any bolts holding on your desktop or control panel, undo them now with a screwdriver. Then you can take everything apart without force. Remove all wires from their connections. It will help you have as much space as possible to work with later when reassembling.
Removing the adjustable monitor shelf
The adjustable monitor shelf that comes standard with certain standing desks can sometimes get stuck in an upward position. Though most of these units come with a manual option for lowering or raising it.
Simply lift up on one side of the shelf until it detaches from its locking mechanism. After that lower it to your desired height and then push down on one side of it until you hear a click and feel resistance.
Some people find it easier to just keep pulling upward on one side until they feel the tension. Once you get past that point, simply release your hand and you should hear a satisfying click as everything re-adjusts itself.
Note: Sometimes standard monitor shelves are mounted in place using small screws instead of a locking mechanism.
Checking all cables
If your desk isn’t staying in place when you press down on it, there are a few things to check. First, make sure that all of your cables are plugged in securely. While you’re at it, take a look at how much slack is in your cables and consider whether any of them could use an upgrade.
Remember that thicker/heavier wires can help reduce resistance as electricity flows through them and make for less-harsh pull-downs on motorized desks. Second, check to see if everything is properly aligned.
Checking the legs
While it’s possible to get stuck at an angle on your standing desk, it’s not likely. Most often, a stuck desk is due to a leg issue. If you can access one of your legs. As opposed to being completely glued in an upright position.
You have a leg that is probably bent or broken. It’s also possible that you have too much pressure from above pushing down on that leg.
To fix either issue, try removing some weight from above (perhaps by adjusting another part of your desk). If you can’t remove weight from above, bend or break that leg back into place.
Lubricating moving parts
A tiny amount of lubricant can go a long way toward easing squeaky, sticky, or otherwise sticky moving parts. A popular choice is 3-in-1 oil (or WD-40), which works on metal, plastic, and rubber components.
Just don’t use it on anything electronic—it’ll only cause more problems down the road. Before you start spraying, know that lubricants like to migrate over time. Wipe off any excess before it has a chance to work its way into your internal electronics.
Also read: Ergotron Standing Desk Stuck In Up Position Fixed
Conclusion
When buying an electric standing desk, many individuals are concerned with making sure that they buy a high-quality product from a reputable brand. Sometimes, it shows the issue of Manual Standing Desk Stuck In Up Position. The idea of standing at your desk all day may be off-putting for some people.
However, if you find yourself always going back to sitting after only a short period of time, it could be time to consider investing in one of these desks. You can still sit at your desk when you need to take a break or feel fatigued, but your goal should be to stand most of the time.
As long as you have plenty of room on your work surface and access to power outlets on each side of your desk (to charge both mouse and keyboard), then all you’ll need is someone to help you install it!
