How To Fix Keurig System Overheated – For Keurig owners, one of the most disheartening things that can happen to you is your Keurig system overheating and/or failing to pump water through to the machine.
What you need to do is simply follow the steps mentioned below in the article. Hopefully, you will be able to solve the problem without any major issues.
Solution#1. Change the Water Filter
The first thing to check is that your water filter has not been clogged.
Running a Keurig with a clogged water filter can cause system overheating, so make sure it’s clean and free of debris before you continue.
It’s also possible that minerals in your water may be affecting it; if you notice problems with multiple appliances in your home, consider having your tap water tested for contaminants.
Solution#2. Clean Your System
If your Keurig system is overheating and leaking water, or if it just won’t make coffee, vinegar is a handy household item that can often bring it back to life.
Just make sure you don’t have a sealed brewer—the vinegar will react with plastic parts in those types of machines.
Before you start cleaning, first turn off and unplug your machine.
Next, take out all of its removable parts (the water reservoir, drip tray, lid/top piece) and soak them in warm soapy water for 10 minutes before scrubbing them clean with baking soda and hot water.
After scrubbing each part well, rinse thoroughly with warm water; let dry completely; and then put everything back together.
Solution#3. Unplug it and Let it Cool Down
If your machine is simply overheating, unplug it and let it cool down.
Once you’ve determined that no electrical components are damaged, fill a cup with lukewarm water and place it on top of your brewer (don’t use hot water).
Leave it there for a few minutes while it comes back to temperature.
Then you can begin brewing again. And if a regular old cup of coffee isn’t enough to get you through to lunchtime without another fix, don’t worry—you can go ahead and brew another one with no adverse effects!
This issue is usually caused by thermal shock or thermal events, which occur when hot water rapidly hits something cold inside your machine.
Solution#4. Before You Brew Again, Run Vinegar Through It
Vinegar can help unclog your Keurig. The small size of a K-Cup can clog things up and prevent your machine from working.
Running vinegar through it can get rid of whatever is clogging your system and prevent that issue in future use.
Simply run about a half cup of vinegar through the machine with one part water (if you are using distilled).
Do not be alarmed if some or all of that comes out at once, because it’s completely normal for some or all of what was in there to come out when you are running vinegar through it.
After that, you should be able to brew as usual.
If you’re still having issues, there might be something wrong with your machine itself; it would probably need to be replaced at that point.
Solution#4. The Hardware is Defective
If your system is overheating (whether it’s a classic or K-Cup brewer), you need to let it cool down before trying to figure out what happened.
After it’s cooled, unplug and reattach your power cord, turn it ON, and then run a full brew cycle with just water.
This can clean out your machine’s dispenser assembly and get rid of any foreign matter that may have gotten into its parts during brewing.
When everything runs smoothly again, switch back to coffee: you’ve avoided a pricey repair call-out.
Solution#5. Contact Customer Service
There’s a specific phone number for every company to call with any questions. The Keurig customer service number is clearly labeled on your packaging and can also be found online.
Customer service representatives are available 24/7 to answer your calls, so if you think you may have a problem after hours or on weekends, go ahead and give them a ring – they will usually be able to solve problems pretty quickly over email or by talking with you through your device itself.
Most companies offer support in different languages as well; it’s never too late to get helpful advice about how to fix the Keurig system.
Most coffeemakers have overheat protection that prevents overheating your water. It may be causing a fire, but sometimes they might not kick in.
Here’s how to fix a Keurig if it gets stuck in an overhead loop. The first thing you want to do is check for leaks by running water through several cycles.
Next, adjust your brew size if possible – Smaller cups will reduce how much water is flowing through, and larger cups will increase it. If you can’t adjust the brew size, try increasing or decreasing the brew time in order to change the flow rate.
Additionally, check that all parts are cleaned of any debris before you start brewing again. Finally, reach out to customer service for help if none of these solutions fix your overheated Keuring system.