Fix Hampton Bay Ceiling Fan Stopped Working? It’s easy to troubleshoot & repair your ceiling fan when you know what to do & have the right tools on hand. Our DIY video tutorial will show you exactly how to fix it fast!
I also did it myself. I did not know what to do in the beginning but after some time I got the problem solved by trying the following fixes.
Replacing Worn-out Fuses
Most fans have a fuse located in their housing. You can locate it by looking at your owner’s manual. Before replacing a worn-out fuse, switch to a new one of equal or higher amperage. For example, if your fan uses a 5-amp fuse, try using a 10-amp fuse.
You may have to replace all fuses with higher-amperage versions if your switches are hot. If your fan still doesn’t work after replacing worn fuses, you probably need to replace your switch or purchase a new ceiling fan altogether.
Replacing ceiling fan switches is relatively easy and inexpensive: Most home improvement stores carry replacement kits for less than $10.
Replacing Worn Out Pull Chains
Does your ceiling fan pull chain feel like it’s stuck in a gear and makes an annoying grinding noise whenever you try to turn on your fan? It could be time for a replacement. Pull chains are often one of the weakest parts of a ceiling fan, which means they’re also one of the first things to break.
To start, get out your ladder and safely climb up so you can remove your old pull chain. Then, feed your new pull chain through until there are about 12 inches left dangling below.
You will have about 3 feet of cable available in total for each switch that needs replacing.
Replacing Worn-Out Switches
First of all, you should turn off the power to your ceiling fan. It is important that you do not work on a ceiling fan with the power turned on.
You can simply flip off a breaker or unplug it. Your goal is to make sure everything stops moving so there are no accidents. Such as getting hit in the head by a blade or being exposed to an electrical shock.
Turn off or unplug your ceiling fan, then set it aside somewhere safe where nothing will interfere with what you’re doing in case something goes wrong while working on it.
If possible, move furniture out of your way but be careful not to bump into anything and cause any damage during relocation.
Replace a Bad Circuit Board
Most issues can be resolved by replacing an easily accessible circuit board. Many home centers sell pre-wired replacement kits or individual switches.
In some cases, you can just snap out a faulty switch or dimmer and pop in a new one. But you’ll need to trace which wires control which functions (also known as bonding) before installing any replacement parts.
Most issues can be resolved by replacing an easily accessible circuit board. Many home centers sell pre-wired replacement kits or individual switches.
In some cases, you can just snap out a faulty switch or dimmer and pop in a new one, but you’ll need to trace which wires control which functions (also known as bonding) before installing any replacement parts.
Replace the Motor
The motor on your ceiling fan is probably one of its most important parts. When a motor breaks, it can cause your ceiling fan to stop working completely, which isn’t fun.
Fortunately, replacing a motor is actually pretty easy with some basic hand tools and about two hours of time. Here’s how to replace a ceiling fan motor
Replacing the Capacitor in DC Motors
If you have a DC motor and it’s run-down, but you’re not ready to replace it, you may be able to get more life out of it by replacing its capacitor. DC motors typically use electrolytic capacitors, which have an expected lifetime of about three years under normal usage.
If your ceiling fan’s fan is slow or noisy, but otherwise seems to be functioning fine, chances are its capacitor needs replacing. To do so without completely tearing down your motor is simple. First, remove power from your ceiling fan by cutting off power at your home’s breaker box or fuse box.
Related: New Ceiling Fan Not Working Fixed
Conclusion
Facing the problem of Hampton Bay Ceiling Fan Stopped working? It may be finally solved by following the steps. Replacing a ceiling fan motor is usually a straightforward process that can be completed in about an hour, depending on how easy access is to your attic.
Not only does it save you money in electric costs, but it’s also quieter than traditional ceiling fans and can be easily controlled with light switches near your bed or couch.
The best part is that if you use our recommendations as guidelines, there’s no reason to call in a professional electrician. Once you get used to tackling DIY home improvement projects yourself, it’ll quickly become one of your favorite pastimes. Happy fixing!
