Did you recently purchase an electric fireplace but are having issues with it not blowing out heat? Are you frustrated and feel like throwing it in the trash?
Don’t let your frustration get the best of you. Instead, use these tips to help you fix the problem and make your fireplace work properly again.
When I got my fireplace, it warmed my room so much that I forgot if there is winter outside. But suddenly, Fireplay stopper blowing heat. Here’s what I did.
Check all electric connections
If you have a gas-burning fireplace, make sure all electric connections are tight and securely attached. If you have an electric fireplace, check to make sure that your wires haven’t become loose.
You should also see if there are any exposed or bare wires in or around your fireplace. Make sure everything is plugged in. After that test your wall outlets with a voltage tester to ensure that they aren’t overheating.
Finally, if you’re using an extension cord for your fireplace’s power source, be sure it hasn’t become damaged by heat or electricity. It might be best to replace it entirely before attempting to turn on your device again.
Clean the firebox
A fire burns hotter when there’s a layer of ash. This is why wood stoves are cleaned regularly to ensure heat production. A similar principle applies to fireplaces. If you want heat, clean out your fireplace.
It’s common for soot and dust to build up inside, which can block airflow and make it difficult for your heater to do its job. You can either use a vacuum attachment or buy a brush designed specifically for cleaning your fireplace.
Using lukewarm water and a non-abrasive cleaning agent (so as not to damage grates), brush away any dust or debris that may be inside.
Replace thermal fuse
If you have replaced your thermal fuse and your fireplace is still not producing heat, you may need to replace your thermostat. A common issue with fireplaces is that they will work for a while but then shut off, leaving them inoperable until they are unplugged and reset.
If this happens to you, chances are it’s an issue with your thermostat. The good news is replacing one is a simple fix that won’t take more than 20 minutes of labor.
Once you have disconnected power from your fireplace, remove the panels on either side of it and unscrew the two screws holding down your thermostat underneath those panels. Remove them, reconnect power and let everything sit for at least 15 minutes to allow things to warm up again.
Replace blower motor
The blower motor may be at fault if your electric fireplace isn’t putting out heat. The motor is responsible for sucking in air and creating a draft for your fireplace, so it’s a good place to start.
If it’s burned out, you can replace it easily enough; just purchase a new one and install it following instructions from your owner’s manual or from an online source like YouTube.
Remember to unplug your fireplace before working on it. Also check for any blockages (for example, foreign objects in the chamber). Blockages can reduce airflow and cause your fireplace not to blow heat.
Related: Fix Crock Pot Power Light Blinking
Also watch the video to fix your problem
The fireplace just doesn’t seem to be blowing heat. Your house is large, and you have a lot of different rooms that you like to keep warm and cozy in. This is why an electric fireplace can be a great option for your home.
It’s easy to install, looks great, and gives off all of those lovely warm vibes. A handy feature with most electric fireplaces is that they actually blow some heat while they look nice and glow, too!
As long as there’s power going to your electric fireplace, it should work just fine! If yours isn’t blowing any heat anymore, here are a few things you can check out before making a call for service