Ceiling fan doesn’t spin anymore but the light is still working? Check these things out to get it spinning again. Here are some quick tips to fix the ceiling fan that stopped working suddenly but the lights still work issue.
All these tips are tried and tested by our experts that can surely help you solve the problem of the Ceiling Fan Stopped Working Suddenly But Lights Still Work issue with ease! I hope they will work on your problem too! Let’s check them out!
I also faced this problem and then I solved it by trying the following fixes. Some of them are mentioned below.
Checking the Power Supply
Most ceiling fans have a switch on them, typically near where you attach them to your ceiling. While you’re standing beneath it, try flipping that switch back and forth several times.
If your fan suddenly starts working again, then you know that your problem is with one of those wires coming into it—and not with the motor itself.
On most models, there are two types of wires: black ones for power in (AC) and white ones for power out (DC). One is always positive and one is always negative.
So if both lights work fine but your fan just doesn’t start spinning, then chances are you need to replace a wire between where they connect to either your home’s electrical system or its junction box up above.
Checking The Pull Chain
If you suspect that your ceiling fan stopped working because of a pull chain issue, check that to be sure. Turn off and unplug the fan from its socket before testing.
This will prevent any injury or shock. Then, simply pull on each pull chain to test if it is loose or broken. If so, consult How to Replace a Pull Chain on a Ceiling Fan for more detailed instructions on how to fix it. If not, move on to other steps in order to troubleshoot further.
Checking The Electrical Wiring
If your ceiling fan has stopped working, it may just be a problem with your light kit. If that’s the case, all you have to do is check a few connections and make sure they’re not loose.
Before touching anything, unplug your fan or turn off its circuit breaker to avoid getting shocked. Locate each wire going into your light kit (usually three or four wires: black, red, blue, and white).
Turn on a nearby light source in order to make sure that there are no loose connections anywhere in your system.
Checking The Light Kit
First and foremost, it’s important to determine that your fan is truly dead. Try swapping out bulbs and see if they work. If they do, then you know it’s not a problem with the electricity reaching your fan (at least on that circuit).
Next, you want to check whether or not your light kit is causing any problems. It’s possible one of its wires has become frayed or loose, preventing power from reaching your fan properly.
The same goes for any additional light fixtures in your room; try replacing them as well before moving on to other steps.
Testing Directly With Another Switch
If you have an extra ceiling fan, give it a try. Your current fan may not be broken at all. If your second fan also stops working, then you know that your first one is likely just having some issue with wiring or a faulty motor.
If your new fan works just fine but was having issues as well, it means that either you have faulty wiring in your home and need to hire someone to rewire it or there’s something wrong with both fans and they are on their way out. Keep testing!
Testing Directly with another fan in a separate box
If you’re lucky, replacing a ceiling fan is a piece of cake. And if you know what you’re doing, it may only take a few minutes. Even so, we don’t recommend that everyone takes on this type of home improvement project.
If your ceiling fan stopped working suddenly, but everything else works fine, then chances are good that there’s nothing wrong with your wiring. Just with your motor or speed control.
The easiest way to determine which component needs repair or replacement is to swap out other components to see if they work properly in another box and compare them side-by-side.
However, for safety reasons it’s essential that you use extreme caution when experimenting with electricity; never substitute anything for a live wire.
Also read: Ceiling Fan Stopped Working Then Started Again Solved
Conclusion
If your ceiling fan has suddenly stopped working, don’t panic. A ceiling fan is a highly engineered device that moves lots of air around a room quickly and efficiently.
When something breaks in a ceiling fan, it’s likely not only one thing but several things that are going wrong at once. In general, fix-it-first involves sorting out what isn’t working in your particular case before you can tackle any single repair challenge.
To sort things out, start by figuring out what exactly isn’t working: Is it just one of its three functions (light, fan, or remote control)? Or does nothing happen when you flip its switch?
