Nintendo Switch is one of the best gaming setups. The most useful feature of the Nintendo Switch is that it allows you the best TV connection. But sometimes a problem occurs when the Nintendo Switch dock blinks once. Here is a complete guide to help you understand the purpose and solution.
Nintendo Switch is the latest gaming tool. It came with new gaming strategies that can keep your mind sharp and active. Games always play an important role in character building. But it is not good for your health if you stick with your gaming tool for too long. Everything looks good in its normal state.
Nintendo Switch dock blinks
There can be a lot of reasons why Nintendo Switch dock started blinking its light. It may be due to a faulty AC adapter, broken HDMI cable, or damaged power outlet. Let’s solve this tragic situation.
1- Undock the switch console
First of all, remove the dock from the Nintendo Switch console then check if the console’s latest version is installed in the system or not.
If the console is already updated then try restarting the console.
- Hold the power button for 3 to 5 seconds.
- Select power option
- Restart your device at least once
If the console is not updated, first install its latest version then you can say that your system is ready to be fully compatible with your Nintendo Switch. You can also try to force your device to shut down by holding its power button for 15 to 20 seconds. Then you can power on the console again.
This is how you can make your console compatible with your device.
Check the port of the dock
If your Nintendo Switch is connected to the dock with a LAN port then you also have to update the firmware for the dock.
2-Unplug The HDMI Cable
Another method to solve the blinking problem is that you can unplug all the HDMI cables at once. Then it is essential for you to reset the adapter. You can easily rest the adapter by disconnecting it from both ends for only 30 seconds. Wait until your adapters cool down. It will help to restart your device.
With excessive usage, your adapter becomes hot which is not acceptable.
While performing these steps make sure the cable is not damaged. If you find any cuts or folded wires then sort this out first. Cable plays an important role in this case. Damaged cables are not acceptable you must replace the cable first. Then try plugging it again.
3-Verify models
Verify the models of the Nintendo Switch and dock console. Make sure they are same and if they are not same then at least they should be compatible in this case. Compatibility matters a lot. You must have knowledge about their different models, working and their differences. After this, you can seek for solution.
4-Correct Connection
To ensure the correct connection you can simply connect the adapter to the dock and connect it to the wall power outlet. After this connect the HDMI cable to the dock. and then make sure it is plugged correctly into the TV screen.
When the console is powered on, then try placing it back in the dock. If you are still facing problems with the flash blinking then you can use another dock with the console. It will resolve your remaining problem.
Also Read: Do not leave your slow cooker in warm mode for too long.
Final Thoughts
Here are some sort of options that could happen with your system. You can try these solutions to make sure your device is in good working condition. The most important thing in this state that matters is that you must care about device compatibility cases. Otherwise, it will lead to serious issues.
These solutions can be held by yourself at home and you do not have to visit any repair store. It will save your time, energy, and money. It is recommended to follow this guide accordingly to solve your simple problems.
If you are unaware of the dock, console, and HDMI cable then it is my suggestion to you that you must not try resetting it at home. Get some knowledge first about what they are and what are their functions.
