The hoverboard battery not charging problem is one of the most common troubles that hoverboard owners often face. Some of you might have encountered this situation before and some of you might never experience it before.
However, if you run into this kind of trouble, don’t worry, this article will offer you some tips to fix your hoverboard battery not charging problem at home. Here we go!
Remove the battery and charge separately
One of the common reasons that cause the hoverboard’s battery not to charge is a fault in its charger. A quick way to test it is to see if you can power up your hoverboard without plugging it into any charger, which you should be able to do since they’re battery-powered (if it powers up and runs, then you know something’s wrong with your charger).
If it doesn’t work with just batteries, remove and charge each individual cell separately; if that doesn’t work either, then chances are there’s a problem with your board.
A good third-party charger should set you back about $15 online; making sure all connectors are secure is another good troubleshooting step.
Test charger for cracks
Even if you have a genuine charger, you’ll want to make sure it isn’t damaged before plugging it in. The best way to do that is to test your charger with another hoverboard battery.
If that battery doesn’t charge on your charger, then something is wrong with either your board or your charger. To test a battery, try plugging it into multiple chargers and see whether they give different results. (If they do, don’t use those boards.) If they all say charged, then go ahead and move on to step 2 below.
Use a different outlet
Check to make sure that you are plugged into a functioning outlet. These devices typically require a standard household outlet with a power of around 120VAC.
You can test it by plugging something else in and making sure it works first; if that doesn’t work, consider purchasing a new wall adapter for your device.
Clean out the charging port
Your charging port may be clogged with dust and dirt, which could cause your device to not charge. Don’t worry—it’s easy to clean.
Just grab a toothpick or small pin and use it to carefully dig out any lint or debris. (If you’re worried about damaging your hoverboard, don’t worry; all of our boards are built to withstand impact from these sorts of small objects.)
Use another power source
One of your first thoughts might be that there’s a problem with your wiring harness or connections. If you have recently purchased new batteries and they don’t seem to fit right into their slots, then it could very well be an issue with your current wiring setup.
Check everything closely, including all connectors and wires that attach to them, making sure everything is clean and intact.
This may actually save you some time in the long run, because if you discover an issue early on, it won’t take as much work to fix it as it would if you were dealing with a more complicated scenario.
Troubleshoot Power Switches
Sometimes hoverboards power on, but nothing lights up and they don’t respond to input. This is usually because of a faulty power switch. This can be a tricky fix and should only be attempted by someone who is familiar with working with electronics.
The first step is opening up your board to get access to all of its components, which may require a screwdriver, hammer, and chisel depending on how firmly your board was put together during manufacturing.
After you’ve removed every component inside, inspect each component for damage such as broken wires or corrosion from water exposure. If you find any problems in your power system, replace them with new ones from a hardware store before reassembling your hoverboard.
Check wiring harnesses and connectors
If you’re not seeing signs of power when you plug in your charger, start with an easy fix. First, check to make sure your wiring harnesses and connectors are fully plugged in. If they’re not, reconnect them and make sure they don’t fall out.
Then look at each one closely; sometimes corrosion or rust buildup can interfere with a connection. Look closely at those areas while you have it open so that you can get a good idea of how to clean it up better before putting it back together.
As with any repair, if you just don’t feel comfortable doing it yourself, seek help from someone who does know what they are doing!
Related: Fix Hoverboard Won’t Stop Beeping
Also watch this video to fix this issue
Conclusion
These hoverboards are popular nowadays, and it will be very convenient for people to take them along with when traveling.
Since these hoverboards are basically propelled by electricity, if there is some problem with its battery charger or battery itself, then there will be no way for people to charge their devices and enjoy using them.
Therefore, to make sure that we can get our money’s worth of these gadgets, here we have some tips on how to fix any problems with a hoverboard battery. The following should also help you find out more about whether your model has been recalled or not.
