After testing it out in the store, I had no problems riding my hoverboard around the store floor and found that it worked just fine, but when I tried to leave the store, my hoverboard started beeping and wouldn’t stop.
I recently purchased a hoverboard, and since it was such an expensive item, I wanted to make sure it was working properly before I left the store. The sales associate told me that this was normal, but that was all he could tell me about why my board kept beeping.
Check the Battery
If your hoverboard won’t stop beeping, first, make sure that it has a full charge. Many people don’t realize how often they need to recharge their hoverboards, which can lead to accidental low-battery situations.
Additionally, remember that you should never leave your board plugged in for extended periods of time when it isn’t in use. This can damage your battery over time and cause problems like overcharging or faulty operation.
To fix the hoverboard that won’t stop the beeping problem, check out our troubleshooting guide, and feel free to contact us!
Recalibrate the Brakes
If your hoverboard won’t stop beeping, it could mean one of two things: either you haven’t charged it enough or your brakes are out of alignment.
In order to fix a hoverboard that won’t stop beeping, you must make sure both conditions are met: for starters, charge it for 24 hours and follow any other instructions that came with your hoverboard.
If there is an issue with your brakes after charging, you should have someone help you recalibrate them.
Remember, I am not responsible for any personal injury caused by attempting to operate a hoverboard in any way except according to manufacturer guidelines so please contact a professional before trying to use it again! Good luck!
Reset the Device
If your hoverboard won’t stop beeping, check to see if it’s in Rest Mode. This can happen when you leave a hoverboard plugged in for too long.
First, unplug all cables that are connected to it. Including both of its battery packs (if it has two), power source, and remote control. After an hour or so, plug everything back in, including the remote control, and continue riding!
If it continues beeping after that point, there could be something wrong with its motor sensors. To reset them: Find a level surface to test on.
Check for Water Damage
First, check all around your hoverboard to see if it’s received any water damage. If you’re not sure how to do that, there are many YouTube videos that can help.
Your board should have a sticker or some other identifying mark indicating its warranty. But even if it doesn’t, a quick search on Google will reveal whether your product is still covered by its manufacturer.
In some cases, you might be able to send in just your charger; in others, you might have to send in your entire hoverboard for inspection and repair.
Try a Manual Reset
If your hoverboard won’t stop beeping and won’t power on, a manual reset might fix it. Hold down both of its buttons for 10 seconds with your device powered off.
While continuing to hold down those buttons, plug in your charger. Then let go of both buttons. Your board should turn on.
If not, you might need to contact customer service; there could be an issue with your battery or charger. Either way, a manual reset is always worth a try before you toss it in the trash bin.
Contact Customer Support
The first thing you should do if your hoverboard is beeping constantly is contact customer support. There could be an easy fix that they’re able to provide over email or phone.
If there isn’t, they might still be able to get you in touch with a manufacturer of your hoverboard, who can help. The bottom line: Don’t return it yet!
Related: Hoverboard Won’t Turn Off Fixed
Watch this video to fix the hoverboard that won’t stop beeping
Have you ever lost power in your hoverboard, and then got a rather annoying beep? If you have, then take some comfort from knowing that it isn’t just you.
A lot of people have reported getting a series of beeps from their hoverboards when they lose power, but fortunately for all of us, there is an easy fix for them.
In most cases, these beeps are simply caused by losing power before you’re ready to get off your board or accidentally pressing a button that sends an important signal to your board’s computer. Both issues can usually be solved with a simple reboot.
If restarting doesn’t solve your problem, there could be something wrong with one of your batteries or motors.