Fix Slime Tire Inflator Not Working – How To Fix Slime Tire Inflator Not Working? If your Slime tire inflator is not working, you are going to have to find a way to fix it.
I have had this problem on more than one occasion, and so I know how frustrating it can be when you need your air compressor the most. But, don’t worry! This article will teach you how to fix your Slime tire inflator that isn’t working correctly and has you in distress.
Check For Clogged Hose
The first thing you want to do if your Slime tire inflator isn’t working is to check the hose for any clogs. A clogged hose is the most common reason why these units stop working.
To do this, unscrew the hose from the unit and blow it into it. If you feel resistance, then there’s a good chance that the hose is clogged.
Pump Air Directly Into Tire Valve
If your Slime tire inflator isn’t working, the first thing you should do is check to see if there’s air in the tires. If not, pump air directly into the tire valve using a hand pump or an air compressor.
You may need to loosen the valve cap first. Once the tire has some air in it, re-inflate it to the recommended pressure.
After this, make sure that the Slime inflator is on, and then start pumping up the tire as usual. When you reach your desired pressure, turn off the inflator and take a look at the tires for any leaks.
Clean Out Slime Pump
If your Slime tire inflator isn’t working, the first thing you should do is clean out the pump. To do this, remove the valve cap and unscrew the pump from the valve stem.
Next, use a paperclip or similar object to clear any debris from the valve stem. Finally, reattach the pump to the valve stem and screw on the valve cap.
Troubleshoot Fuses Section: Replace The Charger
If your Slime tire inflator isn’t working, the first thing you should check is the fuse. If the fuse is blown, you’ll need to replace it. To do this, first, locate the fuse box.
Usually, it’s under the hood of your car. Once you’ve found it, open it up and take a look at the fuses inside. If one of them is blown, simply remove it and replace it with a new one.
Tighten Up The Connector On the Hose
The first thing you’ll want to do if your Slime tire inflator isn’t working is to check the connector on the hose. Oftentimes, this can simply be tightened up and will solve the problem.
If not, there are a few other things you can try…
• Reset your unit: It’s possible that one of the parts in your unit has become stuck in place. To reset it, just unplug it from its power source for about 10 seconds and plug it back in again to turn it back on.
• Check Your Plug: A loose or broken connection between the plug and socket can cause many problems with electrical devices. You should also make sure that the plugs are secure in their sockets before pressing them into use.
• Use A Different Power Source: If none of these solutions work for you, then something else may be wrong with your vehicle’s battery system or alternator – which means an expert should diagnose what needs to be done next!
Also check: Hand Air Pump Not Working Problem Fixed
Also watch the video to solve this issue
Conclusion
If your Slime tire inflator isn’t working, there are a few things you can try to fix it. First, check the power source to make sure it’s working. Next, check the hose for any leaks. You can also restart the device if it is still causing you trouble. Resetting is always the best solution to refresh the device. Afterwards you can go through major problems.
Finally, check the pressure gauge to see if it’s working properly. If none of these solutions work, you may need to replace your Slime tire inflator.
