Our air mattress pumps are not very reliable, which can be annoying if you want to blow up your air mattress quickly. There are ways that you can fix an Intex air mattress pump if it is not working correctly.
But it might be easier to buy another pump if you don’t feel like fixing it yourself. The most common reason why an Intex air mattress pump does not work is because of the power cord going bad, so here are some steps you can take to fix your pump without replacing it right away!
I also faced the same problem after some time of using my Air mattress. I tried the following fixes and finally got the problem solved.
If you have an Intex air mattress pump that is not working, there are a few things you can do to try and fix it. First, check to make sure that the pump is properly plugged in.
Next, check to see if there is any debris or dirt blocking the air intake or outlet. If there is, clean it off and try again. Finally, if the pump still isn’t working, you may need to replace the fuse.
Test The Motor
Check to see if the motor is getting power. The first thing you should do if your air mattress pump isn’t working is to test the motor. You can do this by checking to see if the motor is getting power.
If it is, then the problem may be with the pump itself. If not, then you’ll need to check the wiring to see if there’s a problem there.
Check The Hose and Wire Connections
The first thing you should do if your Intex air mattress pump isn’t working is to check the hose and wire connections.
Make sure that the hose is properly connected to the pump and that the wires are securely connected to the pump. If everything looks good, then move on to the next step.
Clean the Parts
The diaphragm is a rubber disc that gets pushed up and down by the piston. If it’s damaged, the pump won’t work. You can usually tell if the diaphragm needs to be replaced if there’s a hole in it. To do this, you’ll need to remove the piston from the cylinder.
Once the piston is out, take a look at the diaphragm. If it’s damaged, you’ll need to replace it. You can buy a replacement diaphragm online or at a hardware store. To install it, simply put it in the cylinder and reattach the piston.
Changing The Diaphragm
If your air mattress pump isn’t working, the first thing you should check is the diaphragm. The diaphragm is a rubber disk that sits between the piston and cylinder. If it’s damaged, it won’t be able to create a seal, and air will leak out.
You can buy a replacement diaphragm at most hardware stores. Just make sure to get one that’s the same size as your original. To install it, simply remove the old diaphragm and put the new one in its place.
Put It All Back Together Again
The first thing you need to do is take a look at the pump and make sure that all of the hoses are properly connected. In case they’re not, then reconnect them and see if that solves the problem. If it doesn’t, then you may need to replace the hoses.
Next, check to see if the air valve is open. If it’s not, then open it up. After that see if that helps. Finally, make sure that the power cord is plugged in properly. If it’s not, then plug it in and see if that does the trick.
If your Intex air mattress pump is not working, there are a few things you can try to fix the issue. First, check to make sure the pump is properly plugged in and that the outlet is working.
Next, check the air valves to make sure they are open. If those two things don’t work, you may need to replace the pump.