Indy Evo are the latest model of earbuds. They are usually wireless and need Bluetooth for their connection. But sometimes, they cause a lot of trouble for users. One of its everyday problems is that Indy Evo not turning on and cause issues when turning on.
This is why I am here to present you with a solution to help you turn on your device. If you are facing any trouble while turning on your device, read this guide first.
First of all, make sure you charge entirely your earbud case. It takes almost two and a half hours to charge the case of an Indy Evo earbud completely. It is necessary because Indy Evo is an electrical device and won’t work without charging.
Your earbud case must be entirely or at least partially charged. An indicator in the charging case displays how much your device is charged. This indicator is available only in the latest models of Indy Evo. If you have an old model, you can replace it with the latest one.
Sometimes, the primary problem is your damaged charging case. If the charging case is already damaged, then this can be the reason that your earbuds are not charging. In this case, you should replace the case. Another option for you is to repair your charging case, but repairing your charging case is only sometimes beneficial for you.
After charging your earbud case, you should charge it and see if it is already set.
Plug your earbuds into the wingtips of your charging case. As I have told you above, sometimes it happens when your wingtips are not working correctly, and you must face the charging issue. In this case, make sure you repair the wingtip first. If your wingtips are working correctly; you can quickly charge your earbuds.
Make sure you completely charge your device. When your earbuds are connected to the wingtips and it is charging, it indicates a red light, and when your earbuds are completely authorized, it will show a blue light, so you will know when you must detach the device from the wingtips.
3-Turn on Earbuds
After charging your device completely, it is time to use the luxurious Indy Evo earbuds, which provide a high-quality sound system with maximum beats.
When you detach the earbuds from the wingtips, they will start blinking a blue light, which shows that your device is ready to connect. Now, your earbuds are automatically turned on. All you need to do is connect it to your device using Bluetooth, and then you can turn on the audio.
These earbuds are touch-sensitive devices. If you click on the earbuds screen, it will perform a specified function. You may be clicking on the device too much while fixing it in your ear.
The Indy Evo instructions will tell you how to use touch-sensitive functions to perform multiple tasks.
People Also Ask
Most searched answers for your queries.
How can I turn on my Indy Evo earbuds?
It will automatically turn on when you detach your device from the wingtips. Indy Evo is the latest version of earbuds, providing a feature that helps you turn on your device automatically.
How to factory reset an Indy Evo?
Indo Evo is a touch-sensitive device. You can reset the device by holding its screen for at least 10 seconds.
Also Read: What to do if your beats keep turning off?
In this guide, I have explained everything in detail about facing the difficulty when your device is not turning on properly. Reading this guide carefully and performing the step-by-step function to turn on the device again is beneficial. Your device can cause problems due to several reasons. Make sure you take good care of everything your device needs.