How To Fix Daikin Reset Button-Ultimate Guide

I am not an expert in fixing Daikin Air Conditioners, but I have been in the industry for more than ten years and worked on so many Daikin air conditioners that I think I know how to fix the reset button on your air conditioner.

In this post, I will guide you through each step of my process and provide detailed instructions to help you fix Daikin Reset Button on your own.

How To Fix Daikin Reset Button

What Is The Daikin Reset Button?

The Daikin reset button is a small button located on the front of the indoor unit. It is used to reset the air conditioner in case it malfunctions.

If the air conditioner does not work properly, first check if the circuit breaker is tripped. If it is, reset it and try again. In case the problem persists, press and hold the reset button for three seconds. This should fix the problem.

Why Is The Daikin Reset Button Necessary?

The Daikin reset button is a small, red button located on the front of the indoor unit. It is used to reset the air conditioner in the event that it malfunctions. The most common reason for the need to press the reset button is when the air conditioner is not cooling properly.

Other reasons can include the air conditioner not turning on, or strange noises coming from the unit. If any of these problems occur, simply press the reset button and wait for the air conditioner to restart.

What Happens If I Press The Daikin Reset Button?

The Daikin reset button is located on the outdoor unit. It is used to restart the system in the event of a power outage or if the system needs to be reset for any reason. Pressing the reset button will not damage the system.

However, it is important to know what happens when you press the reset button. The system will go through a self-diagnostic mode and then restart. This can take up to 30 minutes. If you have any questions, please consult your owner’s manual or contact a qualified technician.

Problems Encountered When Pressing The Daikin Reset Button

The Daikin reset button is used to clear any stored error codes in the system. Sometimes, pressing the button does not work as intended. In this blog post, we will go over some of the issues that can occur and how to fix them.

One problem that can occur is that the button may be stuck. This can be caused by dirt or debris build-up around the button. To fix this, use a cotton swab or toothpick to clean around the button. Another problem that can occur is that the button may be jammed.

This can be caused by a manufacturing defect or damage to the button itself. If this occurs, you will need to replace the button. Another issue that can come up is that the resetting process may not work properly.

DIY Ways to Turn on the AC if the System Doesn’t Start After Pushing the Button

If your Daikin air conditioner doesn’t turn on after you push the reset button, there are a few things you can try before calling a technician. First, check to see if the circuit breaker has tripped. If it has, simply flips it back on and try to turn on the AC again.

If that doesn’t work, check to see if there’s a power outage in your area. In case there is, you’ll just have to wait for the power to come back on before you can use your AC again.

Finally, if neither of those solutions works, it’s possible that the reset button itself is faulty. In that case, you’ll need to call a technician to come out and take a look at your AC unit.


Some of the questions that people ask are frequently related to the same problem. Some of them are mentioned below.

Why my Daikin AC does not turn on?

If the lamp is off, check the fuse to make sure it hasn’t blown. Secondly, check for a power outage, which is quite a common occurrence. Next, check the power cord.

What does my Daikin light blink?

You need to charge your remote control. As soon as your remote control battery expires, you may notice a blinking light in your air conditioner. This can easily be fixed. You can quickly resolve this problem by replacing the battery in your remote control.


The most likely cause of your Daikin reset button not working is a tripped circuit breaker. If that’s the case, simply reset the breaker and you should be good to go.

If the problem persists, it could be an issue with the control board or wiring. In either case, it’s best to call a professional for help.

Leave a Comment