What causes the Cuisinart KitchenAid Immersion Blender to not pump water? This happens when you press the button but nothing comes out of the tube.
Fortunately, there are several solutions available to resolve this issue, so you can get back to blending your delicious soup, milkshakes, and more.
Let’s take a look at each one of them and see which one suits your problem best.
Check if the water reservoir is empty
The first step to fixing a Cuisinart coffee maker that isn’t pumping water is to make sure that it’s not just out of water.
If you run an empty machine, it could burn out your heating element; if you burn out your heating element, you might as well toss your coffee maker in the trash.
Make sure there’s water in your reservoir and then check for blockages. Before running a cleaning cycle, you want to make sure that all of your filter baskets are empty.
Put them through a few quick runs with water only—we don’t want any coffee residue in there clogging up our pump or pipes.
Make sure there are no leaks in the hose
The most common reason a coffee maker doesn’t pump water is because of a leak in your coffee maker’s hose.
Take it apart and look for signs of leaks, like drips around where your hose meets other pieces.
If you do find signs of a leak, replace that section of tubing and you should be back in business. If no signs of leaks are found, move on to troubleshooting step two.
The first step in fixing a kitchen appliance that’s not pumping water is unclogging it.
Many kitchen appliances clog up because people don’t fully understand how they work and end up using them incorrectly.
Fortunately, removing debris from a kitchen appliance is fairly easy, even if you’re unsure what exactly is causing it to jam up.
Use a needle to pull out any clumps of food or stubborn little items that might be blocking your kitchen appliance.
You can also try using your hands to gently push items out of the way and let more water flow through.
If these basic fixes don’t fix your problem, it might be time to call in an expert or try one of our next ideas for fixing Cuisinart makers not pumping water.
Replace broken parts
To fix a broken Cuisinart maker, you’ll need to replace any broken parts. It can be hard to figure out what’s broken, though.
Sometimes it’s obvious—the power cord is frayed or your food has stuck to the bottom of your machine.
But other times it’s not so easy to tell what’s wrong.
If you’re having trouble figuring out how to fix your machine, try searching for parts on sites like Craigslist or eBay and see if anyone else is selling replacements for similar appliances in good condition.
If nothing works, contact Cuisinart
Contacting Cuisinart is another option to fix a Cuisinart maker that’s not pumping water.
You can contact them by phone, email, or even talk to someone face-to-face. Just make sure you have your product’s model number handy so they can help you find a solution quickly and easily.
Be sure to contact them if these tricks don’t fix your Cuisinart, though; sometimes it might be time for a replacement.
But if it isn’t time for that yet, then at least you’ll know what will work if you run into issues again in the future.
Also go through: Frigidaire Oven Not Working After Power Outage Issue Solved
There are many ways to fix a Cuisinart maker not pumping water. However, you may get it fixed by an appliance professional.
Or use these few steps: If your Cuisinart coffee maker is not pumping out water into your cup and starts making noise after turning on.
First, unplug your coffee machine from its power source for about 10 minutes, and then plug it back in to try making a cup of coffee again.
This will help you figure out if there is any loose water in pipes inside of your Cuisinart DCC-1100 Coffee Maker causing flow issues during operation or shutting down without any flow at all.