Finding that your Air Fryer isn’t heating up can be frustrating, especially when you want to use it.
Fortunately, there are several possible solutions that can help you fix this problem and get your Air Fryer working properly again!
Follow along below to learn more about this problem and how to fix it with these tips and tricks. Hope you will be able to solve the problem by the end of the article.
Determine if it is the outside or inside causing the issue
If it is inside, you may want to check to see if your model needs a new thermostat or if it is burned out.
You will have to contact Customer Service with your warranty information, they will then help you determine which part you need.
If it is outside, there could be a variety of things causing issues such as not enough oil, airflow issue, or other problems that can cause your fryer not to heat up.
More research will be needed in order to fix these problems.
Disassemble (If Necessary)
If your air fryer is not heating up, it may be necessary to disassemble and check each part separately.
Refer to your instruction manual for instructions on how to take apart certain models of air fryers (usually older ones) or, if you can’t find it, Google it.
You’ll want to look for a diagram with step-by-step instructions on how to remove each part without breaking anything.
Remove all parts from your air fryer and check them individually for corrosion or breakage before moving on.
Use Soap, Water, and a Cleaning Brush
First, unplug your air fryer to avoid electrocution. Fill a sink with warm water and add a teaspoon of soap.
Submerge your basket in water and scrub away any stuck-on food particles until they come clean. Rinse well with warm water.
When finished, wipe down your basket with a damp cloth, dry it off with a clean towel, and plug it back in to test if it’s heating up properly again! If not, repeat steps one through three again until you fix your air fryer not heating up problem!
Check Out Vent Hoses
Make sure your air fryer’s vent hose is free of kinks or blockages. If there are, you might have to clean it out before proceeding. If that doesn’t fix it, head to your air fryer’s manual for help replacing it.
Make sure that you follow all instructions closely and use a cloth rather than metal when touching anything inside of your fryer.
Test Heat Element with Ohmmeter
Next, we’ll want to test if your heat element is working properly. This can be done with an ohmmeter.
First, remove the screws from one side of your heating element and unplug your unit from it’s power source.
Now take one lead of your ohmmeter and touch each terminal (where you removed screws).
It may be showing a circuit reading on your meter then which means that both coils are connected across a power source and are likely broken.
If there is no reading on your meter then that means that there is no connection between either coil or they are shorted together.
If there is no reading at all, then check for continuity between each coil and case as well as where they connect in series with each other.
The heating element should show infinite resistance when measured in either direction.
Any resistance less than infinity indicates a break in one or more windings which will result in poor performance and/or damage to other components of your air fryer.
In our case, our air fryer showed open circuits across both terminals so we know our problem lies elsewhere.
Replace Element (If Needed)
If your air fryer is still not heating up, there might be an issue with one of its elements.
The best way to find out for sure if that’s what’s going on is to consult a wiring diagram or manual to determine which element it uses and replace it with a new one (if necessary).
If you’re not able to locate a wiring diagram or manual, you can usually find information online by searching for your air fryer’s brand and model number.
With your new element in hand, you should be able to fix your air fryer without any further trouble.
It doesn’t hurt to have extra elements around just in case; they’re not expensive, so pick some up while you’re at it!
Replace Fan Motor (If Needed)
If your air fryer is still not heating up, it’s possible that a replacement part is needed. If that’s the case, you can follow our guide on replacing an air fryer fan motor .
To find more recipes for your Philips air fryer, please visit Philips Recipes.
When using an air fryer, ensure that you always refer to operating instructions and safety information provided by Philips.
Always use accessories and utensils recommended in these materials. Use of other accessories or utensils may result in electric shock or injury due to overheating.
Also read: Thermostat Not Turning ON Heat Issue Solved
In summary, when it comes to your air fryer, food preparation can be quite simple and easy.
Make sure to take time to read through your user manual thoroughly and follow all instructions carefully.
If you do encounter a problem with your device, contact our experts at EZ Air Fryer today for assistance.
In addition, if you’re still unsure about how an air fryer works or whether it’s right for you; we offer a number of articles that are available on our website along with live chat support for quick answers.
Thanks for reading! We hope you enjoyed reading about Fix Air Fryer Not Heating Up.