Did your electric air pump stop working? Don’t worry! You are not the only one facing this problem, I was also one of them. But, by trying some fixes. I reached a conclusion and was finally able to solve it.
Here’s how to fix it! By following the simple steps below, you will be able to fix your broken electric air pump by yourself at home and save money from buying a new one.
This guide will focus on the most common reasons why an electric air pump stopped working and how to repair it in just 5 easy steps.
Table of Contents
ToggleCheck if the power cord is plugged in
Before you do anything else, make sure that the power cord is plugged into an outlet. If it is, check to see if the outlet is working by plugging in something else.
If the outlet is not working, you’ll need to reset the circuit breaker or replace the fuse. In case the outlet is working, move on to the next step.
Check that your air pump is still working
You should check that your air pump is still working by plugging it in and seeing if the light comes on. If the light doesn’t come on, then you should check to see if the fuse has blown.
You can do this by looking at the fuse box and seeing if the fuse has been burned out. If it has, then you’ll need to replace it. If the fuse hasn’t blown, then you should check to see if the power cord is plugged in correctly.
Sometimes the cord can become loose and needs to be tightened. You can also try plugging the cord into a different outlet to see if that works. If none of these things work, then you may need to buy a new air pump.
Check for a clog in the air pump
An electric air pump is a handy tool to have around, whether you’re inflating a pool float or blowing up an air mattress. But what do you do when your electric air pump stops working?
First, check for a clog. The most common reason an electric air pump stops working is that there’s a clog somewhere in the system. To find the clog, start by disconnecting the hose from the pump. Then, turn on the pump and let it run for a few seconds.
If there’s no air coming out of the hose, the clog is likely in the pump itself. To clear a clog in the pump, start by disconnecting the power cord from the outlet. Then, remove the cover of the pump and look for any obstructions inside.
Bring it to a technician
If your electric air pump has stopped working, the first thing you should do is bring it to a technician. They will be able to take a look at the pump and diagnose the problem.
If the problem is with the motor, they may be able to fix it. However, if the problem is with the pump itself, you may need to replace it.
Try cleaning it
If your electric air pump has stopped working, the first thing you should try is cleaning it. Over time, dust and dirt can build up on the pump and cause it to malfunction.
To clean it, simply unplug the pump and use a soft cloth to wipe away any debris. You may also need to use a small brush to get into all the nooks and crannies. Once you’ve cleaned the pump, plug it back in and see if it’s working properly.
FAQ’s
Some of the questions asked by the people are frequently related to the same problem. A few of them are mentioned below.
Why is the pump of my electric water not working?
You should investigate your breaker box and see if it has tripped. If it has, then you should reset it, and power should be restored to the pump. If it trips again, then the pump has an electrical or mechanical problem, and you will need a plumber to repair it.
Why do air stones stop working?
Why is your portable air pump not working?
Failure of engine is the most common cause of your portable air pump not working. This can also lead to damage compressor.
Conclusion
If your electric air pump has stopped working, there are a few things you can do to try and fix it. First, check the power source to make sure that the outlet is working and that the cord is plugged in correctly.
If everything looks good there, then move on to checking the air pump itself for any obvious damage. Once you’ve ruled out those two possibilities, it’s time to check the air hose for any leaks or blockages.
If you can’t find anything wrong with the air pump or hose, then the problem may be with the valve stem itself. With a little troubleshooting, you should be able to get your electric air pump up and running again in no time!