Scooters are portable and easy to use, but they do have one major flaw; they run on batteries, and sometimes they don’t charge while you’re using them.
When that happens, you’ll be stuck with no way to move around at all. Thankfully, there are some fixes to make that won’t require spending any money either!
Try these out and see if they help your scooter battery charge while running again.
I just got a new scooter and I did not know what to do in this case. A worn-out battery can be very devastating and I was deeply in demise because I spent money on the scooter.
Test Your Batteries
This issue can be caused by faulty or low batteries. Take your scooter out and let it run until it cuts off. Then, walk back to where you started and look at how far you traveled.
This will give you an idea of how much energy is left in your batteries. If they’re not fully charged, charge them for a couple of hours and then try again.
If there’s still an issue, consider getting new batteries for your scooter.
Test the Charger
To determine if your charger is working properly, hook it up to a digital voltmeter and plug it into an outlet. Then, place one probe of your voltmeter on any part of the charger that isn’t made of plastic.
Next, touch that same wire with another probe. The meter should read around 24 volts.
If you don’t get a reading at all or you only get very low voltage readings, there’s an issue with your charger and you should replace it immediately!
This will help avoid accidentally running down and damaging your battery further. It could also damage other parts of your scooter as well.
Check the Fuse
Before you do anything else, make sure your scooter is getting power. In case you have an outlet tester, plug it into your scooter. If there’s no power, then move on to the next step.
If there is power, check your circuit breaker or fuse box to make sure that none of your other appliances are drawing more power than they should be and causing a fuse to blow.
When in doubt, call an electrician—it’s better to be safe than sorry.
Solder the Connections
It sounds simple, but in many cases, a loose wire can be traced to a simple fix. On electric scooters with removable batteries,
for example, check and make sure that all of your connections are intact and that your cables aren’t broken or frayed.
If so, you might be able to solve your charging problem by simply soldering any broken wires back together.
Soldering is a great skill to learn anyway since it’s commonly used on many kinds of electronics projects—even if they’re not scooters!
To do it right takes practice; if you’re new to soldering but want to try your hand at repairing loose connections, there are lots of videos online explaining how to go about it correctly.
Check the Cables and Terminals
If your scooter’s battery is not charging while running, one thing you can do is check all of your cables and terminals.
If they have any corrosion or a dead spot, clean them up with sandpaper or some other abrasive material.
The point is to make sure there are no obstructions that will prevent electricity from flowing through each cable.
You should also ensure that none of your cables are frayed or broken; if there’s a break in your cable, you’ll need to buy a new one.
Always remember to keep replacement parts on hand just in case something breaks! All it takes is one broken terminal for your scooter’s battery not to charge while running!
Repair Tools
The charger is one of their most important scooter repair tools because they will not get far if they are stranded with a dead battery.
However, it’s not uncommon for people to make mistakes that prevent them from charging.
In fact, it’s often quite easy to do damage by accident, but learning how to charge a battery properly can ensure that your scooter does not fail you at an inopportune time.
Here are some of the common ways in which people accidentally ruin their batteries and what to do about it.
Also read: Electric Bike Hub Motor Problems Issue Solved
Conclusion
To ensure your scooter battery has a longer life and keeps running while you’re riding, keep it charged.
Even if you ride frequently and don’t have time to wait for your scooter to charge, there are ways to make sure it doesn’t run out of power.
It is recommended that you charge before every ride so that your scooter will always be ready to use when you need it most.
A fully charged battery allows you to ride more smoothly as well as go further without having to worry about where your next charge is coming from or how much longer it will last.
