A digital scale can be a great addition to your kitchen, as long as it works properly! If you notice that your scale is displaying inaccurate weights or not working at all, try this simple trick to reset the device and get it working again.
First, find the two buttons on the back of the scale and press them both at the same time with your finger. Continue pressing down until you see a number appear on the screen – in most cases, this will be zero (0).
Release the buttons and your scale should now display accurate readings once again! In any case, you would need to follow the steps below.
Press Mode until you see 0:00:00
000 on your digital scale. Your display should say 0 and you will hear three beeps. Press down on one of your feet for 15 seconds.
This will re-calibrate your scale and allow it to display proper weights in ounces, pounds, or kilograms.
The last weight you weighed should be displayed again when you step off your scale. If not, repeat steps 1 through 3 until it is displayed.
After that, press mode until your display shows 00:00:00:000, and then step back onto your scale to weigh yourself again.
It should now show zero but if not repeat steps 1 through 4 until it does so. You are now ready to weigh yourself!
Place your weight on the scale
Make sure you’re standing up, and place your weight directly on top of a digital scale. The number that flashes on the screen is your reading.
Wait until it’s steady to get an accurate result. (You may need to do a few more clicks if you’re trying to weigh yourself after eating or drinking.)
Depending on how sensitive your particular scale is, you might see additional readings while hovering over or pressing down on it; all of these can be thrown out because they aren’t representative of where you are right now.
If you want to know what that number means for your health and fitness goals, here’s how to interpret those numbers
Press Total until it returns to 0.0
The first step to resetting your digital scale is to press Total until it returns to 0.0.
The total indicator on most scales keeps track of how much weight has been added and subtracted since it was the last set at zero; pressing Total simply resets that number back to zero.
After pressing total, you may see an indicator flash twice on some scales, but don’t worry if it doesn’t; some digital scales use different indicators to show they are reset.
If your scale has only one indicator (usually next to the word TARE), then you should see it flash twice. Total will then return to 0.0 again, meaning your scale is ready for use.
Remove the weight from the scale
Put a little bit of pressure on your scale and hold it for at least five seconds. This will reset all of your reading to zero. If you’re not in a hurry, let it sit for 15 minutes, then check again.
If that doesn’t work, try once more before contacting customer service. Most digital scales have an internal battery that will eventually run out, so you may need to replace it.
Wait until the indicator in front of your weight shows zero
One of your scale’s biggest enemies is moisture. Moisture tends to collect on certain parts of your scale, throwing off weight readings. Make sure you keep your bathroom dry; try to wipe up as much moisture as possible with a towel or rag.
If you have hardwood floors, you might also consider putting down some sort of moisture-resistant mat that will help prevent damage to both your floors and your scale.
If there’s still something wrong with your readings after those precautions, try resetting your scale by holding in the on/off button for 5 seconds or so while it’s off, then set it back on its base and make sure everything is completely dry before weighing yourself again.
Press Reset and make sure 0.0 kg/lb appears
Unlike manual scales, digital scales do not always correctly calculate and display your weight. The solution to your problem is quite simple and can be done in only a few seconds.
By resetting your scale, you will ensure that it is calibrated properly so you receive an accurate reading each time you weigh yourself.
This is particularly important if you’ve purchased an antique scale or another used item on eBay or through another similar venue.
Generally speaking, there are two ways to reset a digital scale—the first method requires using an alternate source of electricity while simultaneously keeping track of your remaining balance; but since it involves no fancy tools, we’ll focus on that method in particular.
Also go through: Reset Toshiba TV Without Remote Issue Solved
Conclusion
A weight scale is an essential piece of equipment for those who want to track their body fat. Keeping an eye on your weight can be a good way to keep yourself motivated about your goal to lose or gain weight.
However, you might have difficulty figuring out how much your digital scale may have been impacted by changing temperature, humidity, and altitude.
Luckily, though, it’s easy to figure out how to reset your digital scale so that you know that each time you weigh yourself, you’re getting accurate information about your progress. You just need to follow these simple steps.
